Duttyman
04-28-2007, 12:23 PM
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_cu1.jpg" height="525" width="700" />
Radurra is Italian for clear.
<!--more--><img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_bldg3.jpg" height="525" width="700" />
According to the company's website, "a technique known as bezel setting which only master diamond setters can know, is where the diamonds are just slightly larger than the bezel they are set into, and held in place by pressure. Understanding this, we put the same care and consideration towards the Radurra as we would towards a fine watch."
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_cu3.jpg" height="570" width="675" />
The company also notes that the rims are composed of a hub and outer rings made out of forged aluminum that hold in place a 1.5- or 2-inch think polycarbonate disc that's chemically hard coated. They come in 20- and 22-inch sizes, the former weighing 27 lbs. and the latter 38 lbs.
Each wheel costs approximately $5,000, per wheel! This is definitely way in baller territory.
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_sky2.jpg" height="525" width="725" />
<ul>
<li>Custom Made</li>
<li>The center is 1.5 or 2” polycarbonate, chemical hard coated both sides.</li>
<li>Weight 20” - 27 lbs, and 22” - 38 lbs (complete wheel weight)</li>
<li>All other parts of the wheel are forged 6061t aluminum</li>
<li>(Inner and outer hoops and Hub center)</li>
<li>SAE tested, certified and passed Impact, cornering and radial tests.</li>
<li>Now in production, average delivery time is 6-8 weeks.</li>
<li>Suggested retail is $5000.00 per wheel</li>
</ul>
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/sema1.jpg" height="680" width="533" />
Radurra is Italian for clear.
<!--more--><img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_bldg3.jpg" height="525" width="700" />
According to the company's website, "a technique known as bezel setting which only master diamond setters can know, is where the diamonds are just slightly larger than the bezel they are set into, and held in place by pressure. Understanding this, we put the same care and consideration towards the Radurra as we would towards a fine watch."
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_cu3.jpg" height="570" width="675" />
The company also notes that the rims are composed of a hub and outer rings made out of forged aluminum that hold in place a 1.5- or 2-inch think polycarbonate disc that's chemically hard coated. They come in 20- and 22-inch sizes, the former weighing 27 lbs. and the latter 38 lbs.
Each wheel costs approximately $5,000, per wheel! This is definitely way in baller territory.
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/s550_sky2.jpg" height="525" width="725" />
<ul>
<li>Custom Made</li>
<li>The center is 1.5 or 2” polycarbonate, chemical hard coated both sides.</li>
<li>Weight 20” - 27 lbs, and 22” - 38 lbs (complete wheel weight)</li>
<li>All other parts of the wheel are forged 6061t aluminum</li>
<li>(Inner and outer hoops and Hub center)</li>
<li>SAE tested, certified and passed Impact, cornering and radial tests.</li>
<li>Now in production, average delivery time is 6-8 weeks.</li>
<li>Suggested retail is $5000.00 per wheel</li>
</ul>
<img src="http://i173.photobucket.com/albums/w47/Duttyman_photos/sema1.jpg" height="680" width="533" />